How to Set Up a Trail Camera for Hedgehogs and Small Animals

Hedgehogs, rabbits, and mice are fascinating wildlife to observe, especially at night. With the right setup, a trail camera can capture their natural behavior in your garden.

1. Choose the Right Mounting Height

Mount your trail camera around 20–50 cm (8–20 inches) above the ground. Adjust the angle slightly downward to cover animal paths and feeding areas. Keep the lens and PIR motion sensor unobstructed.

2. Find the Best Recording Distance

Start by testing a distance of around 1–2 m (3–6.5 ft) from the target area. If nighttime images appear too bright, move the camera farther away or adjust its angle.

3. Use No-Glow Night Vision

A trail camera with 940 nm no-glow infrared LEDs can capture nighttime wildlife without a noticeable red glow. Avoid reflective surfaces that may affect image quality.

4. Keep Night Videos Short

Start with 10–30-second video clips to save battery power and storage space. Test different recording modes to find the best balance for your needs.

5. Choose a Suitable Location

Place your camera near animal paths or feeding areas. Remove branches and tall grass that may block the PIR sensor or trigger unnecessary recordings. Avoid disturbing wildlife.

Choose a BLAZEVIDEO Trail Camera

The BLAZEVIDEO A106W, T306, and T326 are worth exploring for wildlife observation. Check each model's specifications for night vision, motion detection, and video recording features before choosing the right trail camera for your garden.