How to Set Up a Trail Camera

Step 1: Remove all items from the box and verify that nothing is missing. The package should contain an inventory list, and please do not worry, BlazeVideo have updated camera’s firmware before shipping out.


Step 2: Determine the best location for placing your trail camera based on what you’re hoping or expecting to capture on film. Many experts recommend scouting locations using a combination of your personal knowledge of the area and Google Maps. Try to place your camera off the beaten path and facing towards the trail for a better chance of capturing more usable photos.


Step 3: Install the trail camera’s batteries when charged, and ensure that the SD (memory) card is also installed. If you forget to install the memory card, all your work will be for nothing and you’ll have to wait even longer to see results. This is also a good time to make sure the trigger speed, trigger frequency, timer and flash settings are configured to your liking. If possible, use a combination of time lapse mode and trail mode to give you a better idea of what’s happening in the area.


4: Mount your trail camera. There are various ways to mount a trail camera. Some individuals wrap bungee cords around the camera and the tree. Other individuals make use of tutorials found online to build their own mounts, as you can buy the necessary parts from your local hardware store for just a couple of dollars. If you are mechanically inclined then this may be your best option. You can also buy trail camera mounts online. Whatever method you choose, the important thing is to make sure the camera is secure and has a clear shot of the field of vision you desire.

If you decide to conceal the camera with brush or other material, be sure to keep the lens clear. It’s also recommended to mount your camera facing either north or south to avoid overexposure and image washout. Lastly, mount your camera slightly higher than eye level and consider purchasing a secure box to protect your camera from would-be thieves, bears, and other entities that have been known to wreak havoc on these devices. You might also want to ask your insurance agent if your trail cameras can be covered with the rest of your valuable hunting equipment.

Step 5: Test your trail camera by activating it yourself. It’s best to do this during the day and at night, using a variety of settings. Log the time each photo was taken and which settings were activated, and then have a look at what’s stored on the SD card to make sure that everything adds up. Before you leave the area, use scent eliminator on and around the camera. You might also want to create some rubs and scrapes to attract deer to the area.

At this point, you should have a properly configured, mounted, and functioning trail camera. To get the most out of your investment over the long haul, you’ll need to know how to manage, monitor and maintain your trail camera.

You’re all set! You should now be able to take the knowledge you’ve gained from this tutorial and use it to successfully set up a trail camera and keep it working for you for a long time. If you have any further questions, or if you’d like to submit a tip that has helped you with your trail camera setup and care, we’d love to hear from you. Happy hunting!

Comments

0 comments

Write a comment

Comments are moderated